Skip to content
Swift Agent Sites

Switching From Oil Heat in Massachusetts: Mass Save Rebates

James Brazil lives in Mérida, Mexico. He founded Swift Agent Sites and studied Classics at the University of Mississippi.

Published · Updated

Real estate for buyers

Massachusetts home with a front yard, illustrating Mass Save heat pump rebates for switching from oil heat
Photo by Avi Werde on Unsplash

If you heat with oil in Massachusetts, Mass Save will pay up to $8,500 toward a whole-home air source heat pump installed in 2026, figured at $2,650 per ton. That rebate drops for projects installed on or after January 1, 2027. Income-qualified households can get up to $16,000, and a 0% HEAT Loan can cover much of what's left.

The timing matters. If you've been on the fence, a heat pump installed by December 31 qualifies for the higher 2026 amounts, as long as you meet the rules below.

How much does Mass Save pay to switch from oil?

Mass Save's air source heat pump page lists three rebate types for 2026:

  • Whole-home: $2,650 per ton, up to $8,500. The heat pump has to be the only heating and cooling source for the home.
  • Partial-home: $1,125 per ton, up to $8,500. You keep the oil boiler or furnace as backup.
  • Basic: $250 per ton, up to $2,500, for cases that don't replace oil, propane or electric heat, like a summer home or a new addition.

Tons are based on the equipment's rated cooling capacity divided by 12,000 BTUs. Income-based enhanced incentives can reach $16,000, or no cost through Mass Save's turnkey services. For those, the existing heat has to be oil, propane or electric resistance.

Mass Save's own cost example uses an average whole-home installation cost of $22,000, from its program data for 2022 projects. With the $8,500 standard rebate, that leaves $13,500. With the $16,000 enhanced rebate, it leaves $6,000. Your quote could be higher or lower, so get more than one.

What changes on January 1, 2027?

Mass Save says the rebates shrink for projects installed on or after January 1, 2027:

  • Whole-home drops to $2,350 per ton, capped at $7,500.
  • Partial-home drops to $1,000 per ton, capped at $7,500.

For a 2026 rebate, the equipment has to be installed between January 1 and December 31, 2026, and your rebate form and documents have to arrive by February 28, 2027. Mid-December isn't the time to start calling contractors. Installer calendars fill up.

What do I need to qualify for the whole-home rebate?

The whole-home rebate has the most strings attached. According to Mass Save:

  • The heat pump must be the sole heating and cooling source. The oil system can't stay in service as backup.
  • The home must be weatherized enough. You can show that if the home was built in 2000 or later, if a Home Energy Assessment recommended less than $1,000 of weatherization, or if weatherization recommended in 2013 or later has been completed. A Whole-Home Heat Pump Verification Form must be signed.
  • The house must be lived in full time during the winter.
  • The equipment must be ENERGY STAR Cold Climate and installed by a contractor in the Mass Save Heat Pump Installer Network.
  • One whole-home rebate per account.

Since October 1, 2026, every heat pump rebate application also needs a clear photo of each outdoor unit's nameplate showing the serial number. Take that photo before the installer leaves.

If your home doesn't meet the weatherization test, Mass Save says you may still qualify for the partial-home amount.

What if I want to keep the oil boiler as backup?

That's the partial-home route. You'll need an integrated control from Mass Save's qualified list, set at or below its maximum switchover temperature, for any zone where oil stays in use. The idea is that the heat pump does most of the work and the boiler kicks in only when it's very cold.

Two $500 bonuses can sweeten a partial-home project. One is for completing a Home Energy Assessment and recommended weatherization within a year before or six months after installation. The other is for sizing the heat pumps to meet 90% to 120% of the home's total heating load, backed by a load calculation from your installer.

How does the 0% HEAT Loan work?

The Mass Save HEAT Loan offers 0% financing up to $25,000 for qualifying upgrades, including heat pumps and weatherization. A few rules to know:

  • Apply before work starts. You submit a signed contractor proposal, get an Authorization Form, then secure the loan with a participating lender.
  • A Home Energy Assessment is required for whole-home heat pump projects.
  • You must be the homeowner with a residential account at a Mass Save sponsor utility.
  • Terms change in 2027. Starting January 1, 2027, seven-year terms are for income-verified customers or qualified areas, and five-year terms for everyone else.

Is there still a federal tax credit?

Not for new installs. The IRS energy efficient home improvement credit, which allowed up to $2,000 a year for qualified heat pumps, covers improvements made through December 31, 2025. Don't count on it for a 2026 project.

Does this matter if I'm buying or selling?

Yes. If you're buying an oil-heated home, our guide to heating oil questions for buyers covers the tank, the oil leak law and how to estimate heating costs. Knowing the 2026 rebate amounts helps you budget a switch after closing, though the whole-home rebate requires full-time winter occupancy.

If you've already switched, keep the invoices, rebate approval and any loan paperwork for the next buyer. And check that your homeowners policy reflects the new system. Our note on what Massachusetts homeowners insurance covers is a good place to start.

FAQ

How much is the Mass Save heat pump rebate in 2026?

The whole-home rebate is $2,650 per ton, up to $8,500. Partial-home is $1,125 per ton, up to $8,500. Income-qualified households can get up to $16,000.

Is the Mass Save heat pump rebate going down?

Yes. For installs on or after January 1, 2027, the whole-home rebate drops to $2,350 per ton and the partial-home rebate to $1,000 per ton, both capped at $7,500.

Do I have to remove my oil system?

For the whole-home rebate, the heat pump must be your only heating and cooling source. For a partial-home rebate you can keep oil as backup, with an approved integrated control.

When is the deadline for a 2026 rebate?

Equipment must be installed by December 31, 2026, and the rebate form and documents must be received by February 28, 2027.

Next step

If you're weighing an oil-heated house or planning to sell one, talk with a licensed local real estate agent. They can help you think through how the heating system affects price, inspections and what buyers in your town expect.

Sources: Mass Save, Air Source Heat Pumps; Mass Save, 0% Interest Financing; IRS, Energy Efficient Home Improvement Credit.

General information for Massachusetts. Not legal advice, a prediction of prices or advice for any specific property. Confirm current rules with your town, a real estate attorney and a licensed agent.

Agents who publish a lightly edited version on their own domain should set a canonical tag pointing to this URL.

Agents serving this area

Lyn Robinson — Lyn Robinson Real Estate, LLC

Massachusetts real estate broker, REALTOR and real estate instructor based in Blackstone, and a Seniors Real Estate Specialist (SRES). Serving Blackstone, Bellingham, Milford, Franklin, Uxbridge and nearby towns.

Real estate agents in Blackstone · Real estate agents in Bellingham · Real estate agents in Milford · Real estate agents in Franklin · Real estate agents in Uxbridge

List your business on the Massachusetts hub, free: Real estate